Table of Contents
Advertisement
58
en | Central Console, computer setup and programming
Figure 7.1: Remote comm port setup dialog
Element
Network Port
Modem Port
System Serial 1/2
COM
2018.03 | SE3v1.0 | DOC
Usage/Description
This port connects the master and slave computers of the Security
Escort System. If this system has only a single computer, this
setting should be set to none.
This port typically connects to the modem for remote access and
pager dial out. If set in the Remote setup dialog, use this port
without a modem for direct connection to a computer that is
always on line.
This is a general-purpose serial port. Its function is set up in the
Remote setup dialog.
The actual physical communication port over which these
communications are carried.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
