Table of Contents
Advertisement
Security Escort
Figure 7.11: Configuring alarm area in the Edit Transponder's Database Record dialog
Element
Number
Serial Output
Pager Group
Robert Bosch (SEA) Pte Ltd
Central Console, computer setup and programming | en
Usage/Description
Each SE coordinator can have up to 80 areas defined in them. This
area number range from 0 to 79. Enter the area number directly or
the [+] or [-] to advance or retreat an area number by 1 at a time.
Use the Locate button to define the area graphically on the map.
The purpose is to send the string in the Serial Output text box
automatically, where the alarm is most likely located, to the
programmed serial port in the Remote Setup dialog. Up to 60
characters may be entered. Control characters may be entered as
"^A" for control A. Clicking the [Serial Output] button sends the
string to the serial port for testing purposes.
This Pager Group field may be programmed with a pager group that
is paged if the alarm location is determined to be in this area. This
pager group will be the first group paged to allow quick response by
those individuals charged with responding to an alarm in this area.
Each area may be assigned a pager group that can be the same or
different from other alarm areas.
The default alarm Pager group defined in the Pager Setup dialog will
also be paged after the pager group is assigned to an area. If a pager
group is not assigned to an area or the alarm location is not within a
defined area, then only the default pager group will be paged.
Technical Reference Manual
77
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
