Table of Contents
Advertisement
Security Escort
Element
[Save Report]
[Send Email]
10.2.9
Muster Reports
This dialog allows the operator to view the current locations of the transmitters that are in
supervision mode. This would be helpful, for example, in the event of an emergency
evacuation where the location of the subscribers can be known quickly. The operator would
be able to see details of the transmitter from the list at one glance. The following are details
of the Muster Reports dialog.
Robert Bosch (SEA) Pte Ltd
Usage/Description
Click the button to save the report in tab delimited format (".dat"
file). A dialog appears to confirm the name and location of the file
to be saved.
The default name of the file to be saved is
Alarm_Flash_Report_DD_MM_YYYY_HH_MM_SS where DD is day of
the month, MM is the month, YYYY is the year, HH is the hour, MM
is the minute and SS is the second.
Click the [Save] button to save the file, or [Cancel] button to abort
the operation.
If there are no records in the Alarm Flash Reports, clicking the
[Save] button will generate an error message dialog.
Click the button to send the report in tab delimited format (".dat"
file) attached in an email, with the filename as the subject header,
to the default Email Notification Group "00".
The default Email Notification Group is configured in Setup >
Email Setup... menu.
If there are no records in the Alarm Flash Report, clicking the
[Send Email] button will generate an error message dialog.
Technical Reference Manual
System menus and dialogs | en 175
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
