AMC2 4W
Fig. 6.2 Restarting the AMC2 4W with the provided screw driver
6.3.2
Resetting the Network Configurations
1.
2.
3.
4.
The AMC2 4W will now have the following network configura-
tion:
Bosch Security Systems
Reset the AMC2 4W as described above (in download pro-
gram).
Open the upper case of the AMC2 4W as described in
Section 5.3 Opening the AMC2 4W Case.
Set all six DIL switches of the RS-485 selector to ON
Press the tamper switch on the upper left side of the board
•
DHCP = 0
•
IP = 127.0.0.1
Installation manual
Operating | en 51
F.01U.024.965 | V.4 | 2006.09