Schedules; Alarm Groups; Alarm Group State - Bosch SE3000 Series Technical Reference Manual

Security Escort
Element
[Save Report]
[Send Email]
10.2.10

Schedules

This selection informs management of the ten-time of day/day of week schedules and
holidays.
See Schedules, page 128 for details.
10.2.11

Alarm Groups

This dialog allows setup and arm/disarm control of the 99 alarm groups. Any number of point
type transmitters can be assigned to an alarm group in the Subscriber Database's Advanced
dialog. However, each transmitter can only be assigned to one alarm group.
See Alarm Groups, page 132 for details.
10.2.12

Alarm Group State

This dialog will display a list of the alarm groups that are currently armed, and have one or
more transmitters (points) faulted. The points are presented because they were not restored
when their automatic schedule armed, or there was an alarm while the alarm group was on.
See Alarm Group State, page 133 for details.
Robert Bosch (SEA) Pte Ltd
Usage/Description
Click the button to save the report in tab delimited format
(".dat" file). A dialog appears to confirm the name and location
of the file to be saved.
The default name of the file to be saved is
Muster_Report_DD_MM_YYYY_HH_MM_SS where DD is day of
the month, MM is the month, YYYY is the year, HH is the hour,
MM is the minute and SS is the second.
Click the [Save] button to save the file, or [Cancel] button to
abort the operation.
If there are no records in the Muster Reports, clicking the
[Save] button will generate an error message dialog.
Click the button to send the report in tab delimited format
(".dat" file) attached in an email, with the filename as the
subject header, to the default Email Notification Group "00".
The default Email Notification Group is configured in Setup >
Email Setup... menu.
If there are no records in the Muster Report, clicking the [Send
Email] button will generate an error message dialog.
Technical Reference Manual
System menus and dialogs | en 177
2018.03 | SE3v1.0 | DOC