Bosch SE3000 Series Technical Reference Manual page 192

Security escort
Hide thumbs Also See for SE3000 Series:
Table of Contents

Advertisement

192 en | System menus and dialogs
Element
[Output 1]
[Output 2]
[Off Output Command] When clicked, the selected Horn-Siren, Green Led, Strobe -Red
[On Output Command]
Transponder group
Transponder
Unlimited retries
[Previous]
[Next]
receiver, bus X, point Y This field displays the current bus number and point number. The
[?]
[+]
[-]
[Cancel]
10.4.5
Transponder current status
This dialog, accessible from the Setup menu, provides a history of communications involving
the selected SE coordinator. It also provides several buttons that can be used to diagnose
problems with the SE coordinator and any of its SE receiver.
2018.03 | SE3v1.0 | DOC
Usage/Description
If this checkbox is selected, the selected Output 1 or 2 of an SE
receiver is turned on if the [On Output Command] button is
clicked, or off if the [Off Output Command] button is clicked. If
this checkbox is not selected, the state of this output is not
changed.
Led, Output 1 and Output 2 are turned off for the selected SE
receiver. If the output does not change, click the [On Output
Command] button, and then click the [Off Output Command]
button again.
When clicked, the selected Horn -Siren, Green Led, Strobe -Red
Led, Output 1 and Output 2 are turned on for the selected SE
receiver. If the output does not change, click the [Off Output
Command] button, and then click the [On Output Command]
button again.
Selects the SE coordinator that you desire to communicate with.
When this checkbox is selected, the Central Console continues
trying to send commands to the SE coordinator even if the
commands are not being acknowledged. (Normally, the Central
Console would cease after 6 retries and declare a communication
failure.) When this screen is closed, the system reverts to the
normal 6 retries.
Returns to the previous SE coordinator.
Advances to the next SE coordinator.
actual point number may be entered in the field to the right.
Opens up the Select Point dialog grid.
Advances to the next point.
Returns to the previous point.
Click to abort all communication tests.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd

Advertisement

Table of Contents
loading

Table of Contents