Table of Contents
Advertisement
Security Escort
Element
[Cancel]
7.11
Powering up the system for the first time
1.
2.
3.
4.
Robert Bosch (SEA) Pte Ltd
Usage/Description
Click this button to close the dialog window. If changes were made,
the dialog window below appears, giving you another chance to save
the changes by clicking the [Yes] button.
Ensure SE coordinator and receiver are powered up.
In the Security Escort Central Console software, select the menu Setup > Transponder
current status. The following window appears:
Select the desired SE coordinator from the Transponder drop-down list box.
Click the [Reset Transponder Troubles] button. If the selected SE coordinator is
communicating with the Central Console, the number "1" will appear in the Total
Outgoing Messages and Successful Incoming Messages fields. The SE coordinator is
now communicating with the Central Console software. If the number "1" only appears in
the Total Outgoing Messages field, there might be a problem between the Central
Console and the SE coordinator (refer to the section Troubleshooting SE coordinators,
points and SE receivers of this manual and locate the problem).
Technical Reference Manual
Central Console, computer setup and programming | en
79
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
