Table of Contents
Advertisement
86
en | Configuring equipment using Utility tool
4.
5.
6.
7.
8.
2018.03 | SE3v1.0 | DOC
Click the [Firmware Upload] button, and a File Browser dialog appears.
Browse and select the firmware file that you wish to upload. Click the [Open] button.
A confirmation dialog box appears. Click the [Yes] button to proceed with the upload, or
the [No] button to abort.
Upon clicking the [Yes] button, the firmware will be uploaded to the selected SE
coordinators, one by one. An indicator bar appears on screen to display the progress for
each SE coordinator's firmware upload. The red and green LED of the selected SE
coordinators will blink continuously during the entire duration of upload. To cancel the
firmware upload, click the [Cancel] button.
For each successful firmware upload, the indicator bar shows the completed status. The
red and green LED of the selected SE coordinators stops blinking and are turned off.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
