Table of Contents
Advertisement
Security Escort
3.
4.
5.
6.
7.
8.3
Operations for the SE transmitter
8.3.1
Scanning SE transmitters and upgrading firmware
Follow the instructions below to scan the SE transmitters that are within the RF
communication range of the SE coordinator, from which the SE transmitter firmware can be
uploaded. You may scan the SE transmitters for only one SE coordinator at any one time. The
scanned SE transmitter will appear in the SE Transmitters grid view.
Details of the SE transmitters listed in the SE Transmitters grid view are described as below:
Robert Bosch (SEA) Pte Ltd
To remove all connected SE receivers, select the first checkbox on the same row as the
column names of the Connected Receivers grid view. All the checkboxes of the
connected SE receivers are selected.
Click the [Remove] button.
An indicator bar appears on screen to display the progress. To abort, click the [Cancel]
button.
Once successfully removed, the indicator bar shows the completed status.
If successful, the selected SE receivers will be moved from the Connected Receivers grid
view to the Available Receivers grid view.
Technical Reference Manual
Configuring equipment using Utility tool | en
93
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
