Bosch SE3000 Series Technical Reference Manual page 115

Security Escort
Element
System Type
Model
Subscriber Type
Robert Bosch (SEA) Pte Ltd
Troubleshooting coordinators, points and receivers | en 115
Usage/Description
Select the option corresponding to the type of system that is
installed. Different options will populate different fields for the
transmitter accordingly.
Transponder (default) Select this if the system is using the
transponders.
Note: Transponder system will not be
discussed in this manual. Please kindly refer
to SE 2000 series manual for details.
Coordinator Select this if the system is using the SE
coordinators.
Click the drop-down list to select the transmitter model that is
assigned to the subscriber. You can select either the "SE3-TRM
Series" or "SEC-3402 Series" transmitters.
SE3-TRM Series (default) Select this if subscriber is using the
SE3-TRM personnel transmitters.
SEC-3402 Series Select this if subscriber is using the
SEC-3402 point tracking transmitters.
Click the drop-down list to select the appropriate class for this
subscriber or asset. Selecting the subscriber type allows the
alarm signal to be used to acknowledge alarms remotely. It does
not create an alarm. When this transmitter transmits an alarm,
the alarms appearing on the alarm screen are acknowledged in
the order they were received. This is the same order the alarms
would be received on a pager for an approving officer.
Acknowledgement Subscriber with acknowledgement
transmitters.
Commuter Normal subscriber type.
Faculty Normal subscriber type.
Installer Subscriber with maintenance transmitters.
Out of Service Out of service transmitters.
Point type Point transmitter for monitoring assets.
Resident Normal subscriber type.
Security Subscriber with security transmitters.
Staff Normal subscriber type.
Unclassified (default)
Visitor Normal subscriber type.
Watchman Normal subscriber type.
Technical Reference Manual 2018.03 | SE3v1.0 | DOC