Storage, Cpu And Network Status; Status Icons - Bosch MIC IP starlight 7000i User Manual

MIC IP starlight 7000i
All connected users receive audio signals sent from the unit but only the user who first
pressed the F12 key can send audio signals; others must wait for the first user to release the
key.
3.1.14

Storage, CPU and network status

When accessing the unit with a browser, the local storage, processor and network status
icons are shown in the upper right of the window.
When a local storage card is available, the memory card icon changes color (green, orange or
red) to indicate the local storage activity. If you hover over this icon with the mouse the
storage activity is shown as a percentage.
If you hover over the middle icon, the CPU load is shown.
If you hover over the right-hand icon, the network load is shown.
This information can help with problem solving or when fine tuning the unit. For example:
–
–
–
3.1.15

Status icons

Various overlays in the video image provide important status information. The overlays provide
the following information:
The frame might show artifacts due to decoding errors.
Indicates that an alarm has occurred.
A communication error, such as a connection failure to the storage medium, a protocol
violation or a timeout, is indicated by this icon.
Indicates a gap in the recorded video.
The watermark set on the media item is valid. The color of the check mark changes according
to the video authentication method that has been selected.
Indicates that the watermark is not valid.
Indicates that a motion alarm has occurred.
Indicates that recorded video is being retrieved.
Bosch Security Systems
if the storage activity is too high, change the recording profile,
if the CPU load is too big, change the VCA settings,
if the network load is too big, change the encoder profile to reduce bitrate.
Decoding error
Alarm flag
Communication error
Gap
Watermark valid
Watermark invalid
Motion alarm
Storage discovery
User Manual
Operation via the browser | en
2017.11 | 1.2 |
11