Table of Contents
Advertisement
Security Escort
Element
Buffer Overflow
Hardware Overrun
Total Remote Access
Connections
Total Wrong Access Code
Attempts
Last Remote Access Time
Successful pager
messages
Failed pager attempts
[Reset Status]
[Refresh Data]
[Cancel]
10.4.11
System status
This dialog shows the status of internal system queues and communications on the serial
ports assigned to SE coordinators.
Figure 10.28: System status dialog
Robert Bosch (SEA) Pte Ltd
Usage/Description
This is the number of times a byte was lost by the software for a
serial port because the input buffer overflowed. Bytes were
placed into the input buffer faster than the system could
process them.
This is the number of times a byte was lost by the hardware for
a serial port because it was not fast enough to process the byte
into the input buffer.
This value is the total number of times a remote access
connection was successful.
This value is the number of times a remote access connection
was attempted and rejected because a valid remote access
code was not received.
This is the time and date of the last successful remote access
attempt.
This value is the number of successful pager messages sent.
This value is the number of times a pager message dial-out was
unsuccessful.
Clicking this button resets all values shown in this dialog.
Clicking this button refreshes all values shown in this dialog.
The values are not automatically updated when the dialog is left
open.
Clicking this button closes the dialog window.
Technical Reference Manual
System menus and dialogs | en 205
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
