Device Model Details; Device Diagnostics; Power Cycle Track; Operating Voltage Track - Honeywell SLG 700 Option Manual

DEVICE MODEL DETAILS:

The device communication board model number is shown under device model detail menu. And
selection of model number option is available to match the model number from Comm board or from
Sensor. This is used when replacing either the comm module or the sensor electronics.

Device Diagnostics:

Time in Service
Minutes the device has been in operation.
Service Life
Percent of expected Service Life that device has been in service. Value is based on conditions such as
electronics temperature. Service life accumulates faster at higher stress conditions.
Stress monitor
Percentage of service time the device has been used under stressful conditions.
������������ �������������� =

Power Cycle Track

The power cycle track gives diagnostics related to the power-up information of the device. The Power
Cycles is the number of power-ups experienced by the device after leaving factory. The Last Power
Up Cycle time is the date and time of the last power up.

Operating Voltage Track

The statistics data for the supply voltage are tracked in the Operating voltage track. Supply Voltage is
the current value of the voltage at the device input terminals. The status of the supply voltage whether
it is normal or below operating value is indicated in the Status of Current Voltage parameter.
Minimum Voltage is the value of the least voltage experienced by the device at the input terminals in
its life time. Last Minimum Voltage Time is the date and time of the last minimum voltage
experienced by the device. The Minimum Voltage can be reset by using the Reset Minimum Voltage
parameter.
Rev.5
������������ ���� �������� ��ℎ�� ������������ ������ ���������� ������������������ ��������������������
�������� ���� �������������� ���� ��ℎ�� ������������
FOUNDATION Fieldbus Option User's Manual Page 61