Transmitter Diagnostics - Honeywell SLG 700 Option Manual

Transmitter Diagnostics

Transmitter faults are grouped into one of these three diagnostic categories and could cause the
following results:
Non-Critical Fault  Transmitter continues to calculate PV output.
1.
Critical Fault  Transmitter drives PV output to failsafe state.
2.
Block Configuration Errors  Incorrect parameter values causes the transmitter to
3.
generate a fault, for example, BLOCK_ERR or MODE_BLK = OOS.
A description of each condition in each category is provided in Table 37, Table 38, and Table 39.
The condition is described, a probable cause is stated and a recommended corrective action is
given for each fault.
Page 194 FOUNDATION Fieldbus Option User's Guide Rev. 3.0