Honeywell SLG 700 Option Manual page 71

Parameter Name
SURFACE_REF_POS
INTERFACE_REF_POS
PROBEEND_REF_POS
PROBE_LEN_OBS_DIS
BLOCKING_DIS_HI_OBS_DIS
BLOCKING_DIS_LO_OBS_DIS
PROCESS_CONNECTOR_OFFSET
LINEARIZATION_TABLE_INDEX
REFERENCE_POS
REFERENCE_AMP
SURFACE_POS
SURFACE_AMP
INTERFACE_POS
INTERFACE_AMP
END_OF_PROBE_POS
END_OF_PROBE_AMP
REFERENCE_ECHO_STATUS
PROCESS_CONN_REF_POS
PROCESS_CONN_REF_AMP
PROCESS_CONN_OFFSET
SURFACE_ECHO_STATUS
INTERFACE_ECHO_STATUS
EP_ECHO_STATUS
PROCESS_CONN_STATUS
STRAPPING_TABLE_INDEX
BLOCKING_DIS_HI_OBS
BLOCKING_DIS_LO_OBS
AMPLITUDE_TRACK
Rev.5
Read only. Surface Reflection Position (True Distance).
Read only. Interface Reflection Position (True Distance).
Read only. Probe and Reflection Position (True
Distance).
Read only. Probe Length Observed Distance.
Read only. Blocking Distance High Observed Distance.
Read only. Blocking Distance Low Observed Distance.
Read only. Process Connector Offset Observed
Distance.
Used in Level Wet Calibration Method to correct a value
in Linearization Table.
Read only. Reference Position
Read only. Reference Amplitude
Read only. Surface Position
Read only. Surface Amplitude
Read only. Interface Position
Read only. Interface Amplitude
Read only. End of Probe Position
Read only. End of Probe Amplitude
Read only. Reference Echo Status
Process Connector Reflection Position (Observed
Distance)
Process Connector Reflection Amplitude
Process Connector Offset Value
Read only. Surface Echo Status.
Read only. Interface Echo Status.
Read only. End of Probe Echo Status.
Read only. Process Connection Status.
Used in Volume Wet Calibration Method to correct a
value in Strapping Table
Blocking Distance High (Observed Distance)
Blocking Distance Low (Observed Distance)
DISABLE
ENABLE
Enabled: Enables amplitude tracking
FOUNDATION Fieldbus Option User's Manual
Description
Page 55