Table of Contents
Advertisement
6.2 Installation instruction details
*
Choose 35mm standard Din-Rail ( the length is confirmed by yourself ), fixed them in the location
which are waiting for installation;
*
Push down the clip under the bottom of the meter for a gear, see fig. 1 and fig.2;
Fig.1
*
Put the meter into the Din-rail as per Fig. 3, then push up the clip for a gear, install meter to the Din-
rail, see Fig. 4;
Fig. 3
*
Making the connection according to the wiring diagram;
*
After connection, use lead sealing to seal terminal cover.
After push down the clip
Fig.2
Fig. 4
Advertisement
Table of Contents
