Parameter List; Table 20: Output Splitter Block Parameters - Honeywell SLG 700 Option Manual

Parameter list

Table 21: Output Splitter block parameters
Parameter
ST_REV
TAG_DESC
STRATEGY
ALERT_KEY
MODE_BLK
BLOCK_ERR
SP
OUT_1
OUT_2
OUT_1_RANGE
OUT_2_RANGE
GRANT_DENY
STATUS_OPTS
CAS_IN
BKCAL_OUT
IN_ARRAY
OUT_ARRAY
LOCKVAL
BKCAL_IN_1
Page 112 FOUNDATION Fieldbus Option User's Manual
Description
The revision level of the static data associated with the
function block.
The user description of the application of the block.
Used to identify grouping of blocks.
The identification number of the plant unit.
The actual, target, permitted, and normal modes of the
block.
Reflects the error status of the hardware or software
components associated with a block. It is a bit string, so
that multiple errors may be shown.
It is the target block setpoint value. It is the result of
setpoint limiting and setpoint rate of change limiting.
The value and status of out_1 of the block.
The value and status of out_2 of the block.
The maximum value range of out_1 of the block.
The maximum value range of out_1 of the block.
Options for controlling access of host computers and local
control panels to operating, tuning, and alarm parameters
of the block. Not used by the device.
Helps select options for status handling and processing.
The supported status options for the OS block are 'IFS if
Bad CAS_IN' and 'Target to next permitted mode if BAD
CAS_IN'.
The remote setpoint value from another block.
The value and status required by the BKCAL_IN input of
another block to prevent reset windup and to provide bump
less transfer of closed loop control.
An array which contains the values of the input or X
variables.
An array which contains the values of the output or Y
variables.
Flag for holding the first output at current value when the
other output is non-zero.
The analog input value and status from another block's
BKCAL_OUT output that is used for backward output
tracking for bump less transfer and to pass limit status.
Rev.5