Honeywell SLG 700 Option Manual page 142

The SLG700 Welcome screen will be displayed while the DTM is reading some basic configuration
parameters from the transmitter.
When the initial reading of data is completed then the user can observe each transducer block menu to
advance to the main menu items.
1. Go through the respective block and perform action, for example double click on LEVELTB
block and click on menu 'DEVICE' and then tick the block mode target as 'OOS' to configure
the parameters.
2. The above statement can be applicable for all the blocks to configure the parameters.
Page 126 FOUNDATION Fieldbus Option User's Guide Rev. 3.0