Tray Auxiliary Guide Operation - Canon Staple Finisher-S1 Service Manual

2
Technology > Processing Tray Unit > Tray Auxiliary Guide Operation

Tray Auxiliary Guide Operation

When two or more sheets with a length of 150 mm or more are stacked on the processing
tray, the tray auxiliary guides slide out to prevent misalignment of paper due to curl.
The tray auxiliary guides are driven by the tray auxiliary guide motor (M6). They slide out
when the inlet Buffer Sensor (S1) detects paper and they slide back when paper is delivered
by the gripper.
The home position of each tray auxiliary guide is detected by the Tray Auxiliary Guide HP
Sensor (S6).
Tray Auxiliary Guide
2 Technology > Processing Tray Unit > Tray Auxiliary Guide Operation
Tray Auxiliary Guide
HP Sensor (S6)
Tray Auxiliary Guide
M6
Tray Auxiliary Guide Motor
F-2-15
The tray auxiliary guide slide-out amount varies depending on the operation mode and paper
length as follows:
Operation Mode Paper Length
Non-Sort / Sort 150 mm or more to less than 217
mm
217 mm or more to less than 300
mm
Staple 150 mm or more to less than 217
mm
217 mm or more
2-11
Amount of Slide Out
55 mm
55 + ("Paper Length" - 216) mm
* The maximum slide-out amount is
120 mm.
55 mm
55 + ("Paper Length" - 216) mm
* The maximum slide-out amount is
120 mm.
T-2-3
2-11