NOTE:
•
When installing the IC Card Reader Box, be sure to install it before installing the Harness
Cover.
•
Refer to the chapter on "Installation" in the Service Manual for installation of the IC Card
Reader Box.
14)
Install the Harness Cover.
NOTE:
Be sure that 2 hooks are properly hooked to the machine.
6
Installation > Installation Procedure > Without Cassette Feeding Unit
6
Installation > Installation Procedure > Without Cassette Feeding Unit
15)
Install the Stack Tray.
• 2 Hooks
NOTE:
Make sure that a click sound occurs.
16)
Rotate this host machine back to the original position.
17)
Close the Reader.
F-6-23
6-9
F-6-24
F-6-25
6-9