Dip Switch Function; Sensor Detection Check Mode - Canon Staple Finisher-S1 Service Manual

5
Adjustment > Dip Switch Function > Sensor Detection Check Mode > Entering the Sensor Detection Check Mode

Dip Switch Function

[1] DIP Switch (SW1)
[2] Push Switch (SW2)

Sensor Detection Check Mode

■ Entering the Sensor Detection Check Mode
(1) With the host machine turned off, set the DIP switch (SW1) as shown below. While pressing down the push switch (SW2), turn on the host machine.
5 Adjustment > Dip Switch Function > Sensor Detection Check Mode > Entering the Sensor Detection Check Mode
[2] [1]
ON 1 2 3 4
F-5-3
F-5-2
5-3
5-3