Removing The Front Door Switch (S15) - Canon Staple Finisher-S1 Service Manual

4
Parts Replacement and Cleaning Procedure > Switches > Removing the Front Door Switch (S15) > Procedure

Removing the Front Door Switch (S15)

■ Preparation
1) Remove the Finisher Unit from the connected equipment(Refer to page 4-9).
2) Remove the Staple Cartridge(Refer to page 4-22).
3) Remove the Front Cover(Refer to page 4-15).
■ Procedure
1) Remove the Front Door Switch Unit [1].
• 1 Screw [2]
1x
[2]
4 Parts Replacement and Cleaning Procedure > Switches > Removing the Front Door Switch (S15) > Procedure
F-4-141
[1]
F-4-142
2) Remove the Front Door Switch [2] from the Front Door Switch Unit [1].
• 1 Screw [3]
• 2 Connectors [4]
1x
[4]
2x
NOTE: How to install the Front Door Switch
Be sure to fit the boss [1] of the Support Plate into the hole [A] of the Front Door Switch
when installing the switch.
[A]
4-53
[3]
[2]
[1]
F-4-143
[5]
F-4-144
4-53