Removing The Main Paddle - Canon Staple Finisher-S1 Service Manual

Hide thumbs Also See for Staple Finisher-S1:
Table of Contents

Advertisement

4
Parts Replacement and Cleaning Procedure > Major Units > Removing the Main Paddle > Procedure

Removing the Main Paddle

■ Preparation
1) Remove the Finisher Unit from the connected equipment(Refer to page 4-9).
2) Remove the Staple Cartridge(Refer to page 4-22).
3) Remove the Front Cover(Refer to page 4-15).
4) Remove the Rear Cover(Refer to page 4-16).
5) Remove the Upper Cover(Refer to page 4-17).
■ Procedure
CAUTION:
Be sure to perform the work while keeping contact with the 4 new Main Paddles [1] at a
minimum at disassembly/assembly.
4
Parts Replacement and Cleaning Procedure > Major Units > Removing the Main Paddle > Procedure
F-4-56
[1]
[1]
F-4-57
1) Turn the Sensor Flag [1] to provide access to the 4 [A] parts of the Main Paddle as shown
in the figure below.
[A]
[1]
2) Remove the 2 Main Paddles [1].
• 2 Bosses [2]
[1]
[2]
4-25
[A]
F-4-58
[2]
F-4-59
4-25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents