Canon Staple Finisher-S1 Service Manual page 68

4
Parts Replacement and Cleaning Procedure > Major Units > Removing the Finisher Lower Feed Guide Unit > Procedure
NOTE: How to install the Finisher Lower Feed Guide Unit
1) While tilting the Finisher Lower Feed Guide Unit to make the edge [A] of the unit
parallel to the edge [B] of the hole of the Front Plate, align the edge [C] of the
Finisher Lower Feed Guide Unit with the [D] part of the Front Plate.
[D]
[B]
[A]
4 Parts Replacement and Cleaning Procedure > Major Units > Removing the Finisher Lower Feed Guide Unit > Procedure
[C]
F-4-76
2) Hook the gear [2] on the grooves [E] of the Rear Plate.
[2]
3) Lift the front side [F] of the Finisher Lower Feed Guide Unit and push down the rear
side [G]. Then, secure with the 5 screws removed previously.
[F]
[F]
4-31
[E]
F-4-77
[G]
F-4-78
4-31