Removing The Buffer Path Unit From The Connected Equipment - Canon Staple Finisher-S1 Service Manual

4
Parts Replacement and Cleaning Procedure > Removing the Equipment > Removing the Buffer Path Unit from the Connected Equipment > Procedure
5) Release the Latch Release Lever [1] and remove the Finisher Unit [2].
CAUTION:
Be careful not to drop the Finisher Unit [1] when disassembling/assembling.
[1]
4 Parts Replacement and Cleaning Procedure > Removing the Equipment > Removing the Buffer Path Unit from the Connected Equipment > Procedure
[1]
■ Preparation
■ Procedure
F-4-18
[2]
F-4-19
Removing the Buffer Path Unit from the Connected
Equipment
1) Remove the Finisher Unit from the connected equipment(Refer to page 4-9).
CAUTION:
Be careful not to drop the Buffer Path Unit [1] when disassembling/assembling.
4-11
F-4-20
[1]
F-4-21
4-11