Processing Tray Unit; Outline - Canon Staple Finisher-S1 Service Manual

2
Technology > Processing Tray Unit > Outline

Processing Tray Unit

Outline

The processing tray unit aligns, shifts, and staples the delivered paper, and then delivers the
paper onto the stack tray using a gripper.
Names and roles of the components of the processing tray are as follows:
Paddle
Front Alignment Plate
M4
Front Alignment
Motor
Paper Return
Paddle
Stapler
Tray Auxiliary Guide
2 Technology > Processing Tray Unit > Outline
Rear Alignment Plate
Paddle
M3
Motor
M5
Rear Alignment
Motor
M2
Delivery
Motor
Paper Return
Stopper
Paddle
Gripper
Tray Auxiliary Guide
M7
Gripper Motor
M6
Tray Auxiliary Guide Motor
F-2-11
No. Name
[1] Paddle Stacks the paper delivered from the delivery roller on the
processing tray.
[2] Paper Return Paddle Presses the paper stacked on the processing tray against
the stopper (alignment in the feed direction) and prevents the
previously stacked paper from being fed/delivered.
[3] Front / Rear Alignment Aligns the paper stacked on the processing tray in the width
Plate direction and shifts the paper.
[4] Gripper Grips the paper stack on the processing tray, and then delivers it
to the stack tray.
[5] Tray Auxiliary Guide When two or more sheets with a length of 150 mm or more are
stacked on the processing tray unit, prevents misalignment of
paper due to curl.
[6] Stopper Allows the paper stacked on the processing tray to be pressed
against itself to align the paper in the feed direction.
[7] Stapler Staples sheets of paper.
2-8
Function
T-2-2
2-8