Removing The Tray Guide Cover - Canon Inner Finisher-H1 Service Manual

CAUTION:
Points to Note when Installing the Delivery Tray
1. Do not nip the Paper Fold [1] when the Delivery
Tray [1] is installed.
When attaching the Delivery Tray is difficult by the
Paper Fold position, move the Tray Rack [A] to the
bottom for ease of assembly.
[A]
[1]
[2]
[A]
4. Parts Replacement and Cleaning
2. When installing the Stack Tray, check that the 2
Claws [2] and 2 Hooks [3] of the Stack Tray [1] is
properly installed. If the installation fails, error;
E540-8001/8002 may occur at power ON.
[1]
Removing the Tray Guide
Cover
■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 41
2. Remove the Front Cover
Cover Unit" on page 55
3. Remove the Rear
on page 55
4. Remove the Delivery
Tray" on page 56
5. Remove the Upper Feed
Upper Feed Guide Unit" on page 59
57
[2]
[3]
[2]
[3]
[2]
[3]
Unit."Removing the Front
Cover."Removing the Rear Cover"
Tray."Removing the Delivery
Guide."Removing the