Removing The Staple Unit - Canon Staple Finisher-S1 Service Manual

4
Parts Replacement and Cleaning Procedure > Major Units > Removing the Staple Unit > Procedure

Removing the Staple Unit

■ Preparation
1) Remove the Finisher Unit from the connected equipment(Refer to page 4-9).
2) Remove the Staple Cartridge(Refer to page 4-22).
3) Remove the Front Cover(Refer to page 4-15).
■ Procedure
1) While holding the [A] part of the Motor Cover, disconnect the 2 connectors [1].
4 Parts Replacement and Cleaning Procedure > Major Units > Removing the Staple Unit > Procedure
F-4-50
2x
[A]
[1]
[1]
F-4-51
NOTE:
If the claw [2] of the Motor Cover is disengaged, hook the claw again.
[2]
2) Remove the Staple Unit [1].
• 2 Screws [2]
2x
[2]
4-23
1x
[2]
F-4-52
[1]
F-4-53
4-23