Recording Filter Popup - Roland MV-8000 Owner's Manual

RECORDING FILTER popup

Here you can restrict the data that will be recorded
during MIDI sequence recording.
Explanation of each area
1. Filter
Messages with the ✔ mark will be recorded. If you
remove the ✔ mark, those messages will not be
recorded on the sequencer.
Parameter Explanation
Note messages. Data that plays
Note
notes.
Polyphonic aftertouch. Data that ap-
Poly
plies aftertouch independently to an
Aftertouch
individual key.
Control changes. Data that applies
Control
various effects (e.g., modulation) ac-
Change
cording to the control number.
Program changes. Data that selects
Program
sounds (patches).
Change
Channel aftertouch. Data that ap-
Channel
plies aftertouch to an entire channel.
Aftertouch
Pitch bend. Data that changes the
Pitch Bend
pitch.
This MIDI message causes an analog
Tune
synthesizer to tune itself.
Request
MIDI Mode Message that changes
Mode
the mode
Message
System exclusive messages. MIDI
System
messages specific to the MV-8000.
Exclusive
To access this screen
➜ ➜
•
➜
•
In order to open this popup, you must specify a
MIDI track as the current track.
F-buttons
All On
Specifies all messages will be recorded.
All Off
Specifies all messages will not be recorded.
On/Off
Specifies whether the message at the cursor will be
recorded.
Close
Closes the RECORDING FILTER popup.
SEQUENCE
➜
213