Naming A Project; Protecting A Project - Roland MV-8000 Owner's Manual

Naming a project

Here's how you can assign a name to your project for easier management.
1.
Load the project that you want to name as described in LOAD PROJECT
screen (p. 315).
After the project has been loaded, the SEQUENCE screen (p. 205) will appear.
2. Press .
The PROJECT MENU screen (p. 308) will appear.
3. With the cursor located in the upper row of
icons, press
the NAME icon and press
The EDIT PROJECT NAME (p. 199) will appear.
Enter the desired name. For details on entering text,
refer to p.9.
4.
When you've finished entering the name, press

Protecting a project

Here's how you can protect a project so that it cannot be accidentally deleted or
overwritten.
1. Press .
The PROJECT MENU screen (p. 308) will appear.
2.
With the cursor located in the upper row of icons, press
Alternatively, select the PROTECT icon and press
The SET PROJECT PROTECTION screen (p. 310) will appear. The display will list
the projects saved on the hard disk.
3. Move the cursor to the project that you want to protect, and press
(Protect On).
The project will be protected. You can press [F5 (Protect Off)] to turn off the protect
setting.
(Name). Alternatively, select
.
Project and disk management
(OK).
(Protect).
.
Changes you make to the
project name apply to the
current project.
You can assign a name of up to
twelve characters.
137