Dimm Diagnosis Popup - Roland MV-8000 Owner's Manual

DIMM DIAGNOSIS popup

This checks the memory module installed in the
MV-8000.
A confirmation message "Save current project
before?" will appear. Your changes will be lost unless
you save the current project before starting DIMM
DIAGNOSIS.
F-button Explanation
To execute DIMM DIAGNOSIS
No
without saving the current project.
To save before executing DIMM
Yes
DIAGNOSIS
To cancel without executing DIMM
DIAGNOSIS
If you don't save the current project at the "Save
Current?" prompt, there is no way for you to
recover that data (unless you have previously made
a backup of it). Roland accepts no responsibility for
the recovery of lost data, nor for any damages that
may result from such loss.
To access this screen
➜ (move the cursor to the upper row of
•
icons) ➜ ➜
Now Checking...
The memory module is being checked. Please wait
until checking is completed.
Result
Indicates the result of checking the memory module.
Display
OK
NG
If the result of the test is NG, the installed DIMM is
faulty. Since data cannot be written or read from
this DIMM, it is possible that a malfunction will
occur in the MV-8000's operation. Please replace the
DIMM (p. 186).
F-buttons
Close
Closes the MEMORY DIAGNOSIS popup.
SYSTEM
Explanation
The DIMM is OK.
The DIMM is faulty.
327