Piano Roll Edit Screen - Roland MV-8000 Owner's Manual

PIANO ROLL EDIT screen

Here you can edit the MIDI messages that are
recorded on a MIDI track. The piano roll graphically
indicates the pitch, duration, and velocity.
Explanation of each area
1. Note number (keyboard)
The note numbers (keys) are shown from bottom to
top. Since the actual pitches correspond to the note
numbers, the displayed location of the note tells you
the pitch.
2. Step Time
This is the unit by which the current time will move
when you press the step buttons (
3. Editing Region
Displays the editing region (region in time~out time).
4. Piano roll
This shows the note events. The horizontal axis is
time, and the vertical axis is note number (pitch). You
can change the note number or time location by
moving the displayed note event.
5. Velocity
Indicates the velocity of the note event. The velocity is
shown as a pair with the note event; a longer bar
indicates a stronger velocity.
To access this screen
•
F-buttons
Selects/de-selects the note number at the note cursor.
If an In time and Out time are specified for the
selected note number, the note numbers existing
within that time range will be selected.
Selects/de-selects all note numbers. If all note
/ ).
numbers are selected, and an In time and Out time
are specified, all note numbers existing in that time
region will be selected.
Specifies the editing region. Press this once to set the
beginning (In time) of the editing region, or once
again to set the end (Out time) of the editing region. If
you press it yet again, the beginning (In time) of the
editing region will again be set.
Displays the SELECT PIANO ROLL EDIT
COMMAND popup (p. 224).
➜
In order to open this popup, you must specify a
MIDI track as the current track.
Note Sel (Note select)
All Note Sel (All note select)
Rgn In/Out (Region In/Out)
Command
SEQUENCE
221