Other Onscreen Ez Routing Tools; Phantom Power Switches; Activating Digital Inputs; Recording Bus Attenuation - Roland VS-2480 Owner's Manual Addendum

8—VGA Main Display EZ ROUTING Screen

Other Onscreen EZ ROUTING Tools

Phantom Power Switches

You can turn on phantom power (Owner's Manual Page 130) to any of the XLR input
jacks by clicking its button in the PATCH BAY pane so the button lights. To turn off
phantom power, click the button again so its light goes out.

Activating Digital Inputs

The VS-2480 can receive up to 16 digital input signals at a time. The R-BUS 1
connections are always active. You can activate the desired R-BUS 2 connections—and/
or the desired coaxial and/or optical digital inputs—as described on Owner's Manual
Page 131.
On the VGA, every possible combination is represented by a digital input selector
button in the PATCH BAY pane. Each currently selected digital connection turns white
to show that it's activated and available for use.

Recording Bus Attenuation

The REC BUS ATT knob in the OUTPUT ASSIGN pane allows you to adjust
the overall recording level to all tracks at once, as described on Owner's Manual
Page 201. This can be helpful when bouncing, and should otherwise be set to
-6.0dB.
82 www.RolandUS.com
On
Roland VS-2480 Owner's Manual, Version Two Addendum
In this illustration, you can see that
R-BUS 2 Inputs 1, 2, 5, 6, 7 and 8
and the optical digital inputs are active.