Roland MV-8000 Block Diagram

Sample Type
(Stereo/Mono)
MFX Routing
(when Input) [*1]
Filter, Amplifier
/w LFO
PHONO
PHONO
EQ
MIC/LINE(TRS)
Level [*3]
MFX Routing
(when AUX 1~4)[*1]
Copyright © 2003 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without
the written permission of ROLAND CORPORATION.
2003
*1 Location of MFX can be set on Routing parameter in EFFECTS screen.
You can select from Input, AUX 1~4 or Master.
Output Assign [*2]
*2 In case Output parameter of the Instrument part is set to Partial, target of output follows to seting of Partial output.
*3 Send level to Delay/Chorus and Reverb changes if part level parameter is changed.
Mastering Tool Kit
MFX Routing
(when Master)[*1]
On
when
Mastering
Off
03341178 '03-12-2KS