Patch Library Screen - Roland MV-8000 Owner's Manual

INSTRUMENTS

PATCH LIBRARY screen

Here you can select a patch from the patch library,
and make it the current patch.
Explanation of each area
1. No. (Patch library number)
The patches in the library are numbered from
U001~U128.
2. Name
Displays the patch names and categories. The patch
currently selected by the cursor is highlighted.
3. Category
Displays a category name, where you selected the
category of the library that will appear in here.
4. Preview
If this is on, the patch selected by the cursor will
temporarily be assigned to the pads, allowing you to
audition it.
268
To access this screen
INSTRU-
MENTS
➜
•
F-buttons
Write Here
Displays the Write Current Patch message. If you
then press [F5 (Yes)], the patch of the current part will
be saved to the cursor location within the list. If you
decide not to save, press [F1 (No)].
Category
Displays the SELECT CATEGORY popup (p. 201).
Here you can limit the category of the patch that will
appear in the patch library list.
Preview
Switches the value of patch preview on/off.
Use This
The patch selected by the cursor will become the
patch for the current part, and the INSTRUMENTS
screen (p. 265) will appear.
If you decide to leave the popup without doing
anything, press [EXIT].