Inserting Performance Data (Create Event) - Roland MV-8000 Owner's Manual

Inserting performance data (Create Event)

Here's how to insert new performance data into the desired location within a MIDI
track.
For details on the types of performance data you can insert, refer to Types of
performance data handled by a MIDI track (p. 108).
1.
Execute steps 1~4 of Using the EVENT LIST EDIT screen to edit a MIDI
track (p. 106).
The EVENT LIST EDIT screen (p. 216) will appear.
2.
Use (up/down) or the VALUE dial to move to the time location where
you want to insert a data event.
3.
Press (Create).
The CREATE EVENT popup (p. 217) will appear.
4.
Use (up/down) or the VALUE dial to select the type of performance
data event that will be inserted.
5.
Press .
The performance data will be inserted. The event will be inserted with default values;
edit the values as desired.
Editing a song
When you use the up/down
cursor keys to change the
current time, the event located
at that time will be transmitted
from the MIDI OUT connector.
If you are not satisfied with the
result of executing this
command, press
[UNDO/REDO] to return to
the state prior to execution (p.
80).
107