16 Stereo Distortion; Distort (Stereo Distortion) - Roland MV-8000 Owner's Manual

16 Stereo Distortion

Distort (Stereo distortion)

This is a virtual analog distortion that reproduces the
sound of compact effects for guitars.
1. Tone
Value: 0–100
This adjusts the brightness of the sound. When this
value is set high, the distortion is loud and bright.
2. Level
Value: 0–100
Sets the output volume. Distortion also increases the
volume levels; you can use this parameter to control
it.
3. Dist
Value: 0–100
Sets the degree of distortion. At the source sound
with low volume levels, there may be no distortion,
even with the value increased.
Two distortion units are linked and arranged in
parallel (left and right) to make the algorithm stereo
compatible. If you can't adjust the tone enough with
the Tone control, use the equalizer at the next stage.
Other effect blocks
EQ (3-band equalizer) (p. 401)
NS (Noise suppressor) (p. 404)
Effect Block
421