Roland MV-8000 Owner's Manual page 297

Time
+63
0
-63
C1 C2 C3 C4
8. Key Sync
Specifies whether the start of the LFO cycle will
match the note-on timing (ON) or not (OFF).
Range: Off, On
9. Depth Pitch
Specifies the amount by which the LFO will affect the
pitch.
Range: -63~0~+63
10. Depth Filter
Specifies the amount by which the LFO will affect the
cutoff frequency.
Range: -63~0~+63
11. Depth Amplifier
Specifies the amount by which the LFO will affect the
volume.
Range: -63~0~+63
12. Depth Pan
Specifies the amount by which the LFO will affect the
panning.
Range: -63~0~+63
Positive (+) and negative (-) values of these Depth
settings will produce the opposite change in pitch or
volume. For example if you specify a positive (+)
Depth value for one partial and an identical but
opposite negative (-) value for another partial, the
two will be modulated in opposite directions. You
can use this to exchange two different partials, or in
conjunction with Pan to make the sound location
move cyclically.
0
Keyboard
C5 C6 C7
Pitch
F-buttons
Sample Edit
Displays the SAMPLE EDIT screen (p. 279).
SMT (Sample Mix Table)
Displays the PARTIAL EDIT (SMT) screen (p. 289).
Filter
Displays the PARTIAL EDIT (FILTER) screen (p.
291).
Amplifier
Displays the PARTIAL EDIT (AMPLIFIER) screen
(p. 294).
INSTRUMENTS
297