Load Project Screen - Roland MV-8000 Owner's Manual

LOAD PROJECT screen

Here you can load a project, making it the current
project.
Explanation of each area
1. Project list
This area lists the saved projects. The project selected
by the cursor is highlighted.
2. Name
This area shows the names of the saved projects.
3. Wave Size
Displays the size of project at the cursor in project list.
F-buttons
Execute
Loads the project selected by the cursor. When
loading is completed, the SEQUENCE screen (p.
205) will appear.
If the display asks "Save Current?"
Your changes will be lost unless you save the current
project before loading another project.
F-button Explanation
To discard your changes and load
No
the project.
To save the current project before
Yes
loading the project.
Cancels the loading project
operation.
If you don't save the current project at the "Save
Current?" prompt, there is no way for you to
recover that data (unless you have previously made
a backup of it). Roland accepts no responsibility for
To access this screen
➜ (move the cursor to the upper row of
•
icons) ➜
the recovery of lost data, nor for any damages that
may result from such loss.
If the display indicates "Current project is protected.
Can't overwrite it."
The current project is protected, and cannot be
overwritten (saved). You will either have to turn off
Protect before saving the project, or use SAVE AS
NEW PROJECT popup (p. 313) to create and save a
new project.
If the display indicates "Project is too large"
The project you are attempting to load is too large to
load. This can occur if the currently-installed amount
of memory is less than the amount of memory that
was installed when you created the project. In order
to load this project, you will need to install at least as
much memory as was installed when the project was
created.
PROJECT
315