Roland MV-8000 Owner's Manual page 58

Editing a sampled sound
To create a partial that combines more than one sample (SMT)
You can create an SMT (Sample Mix Table) that combines up to four samples and uses
velocity to switch between them.
1.
Press (SMT).
The PARTIAL EDIT (SMT) screen (p. 289) will
appear.
2. Move the cursor to any SMT number 1~4 and
press (Sample List).
The SAMPLE LIST popup (p. 281) will appear.
3. Select a sample and press
The selected sample will be assigned to the Sample
you selected in step 2.
4. Edit the parameters for each sample.
Adjust the sample's volume, pan, and pitch. For details on the parameters, refer to the
PARTIAL EDIT (SMT) screen (p. 289).
5.
Set the Velocity Range parameter for each sample.
This lets you play different samples according to your playing dynamics. or details on
this parameter, refer to the PARTIAL EDIT (SMT) screen (p. 289).
58
(Select).
You can use up to four
samples to create the partial.