Save As New Project Popup - Roland MV-8000 Owner's Manual

SAVE AS NEW PROJECT popup

Here you can save the current project under a
different project name.
Explanation of each area
1. Project Name
Specify a new project name when you save the
current project.
F-buttons
History
You can recall (and re-input) up to the ten most
recent names you input in the EDIT NAME popup
since turning on the power. Selects the name at the
cursor in the history list then press [ENTER].
Insert Space
Inserts a space at the cursor location.
Delete
Deletes the character at the cursor location.
Characters at the right of the cursor will be moved
forward to fill the gap.
A➜a/a➜A (switch character case)
Switches the character at the cursor location between
uppercase and lowercase.
Execute
The project will be saved, and that project will
become the current project. Then the SEQUENCE
screen (p. 205) will appear.
To access this screen
➜ (move the cursor to the upper row of
•
icons) ➜
If the display indicates "That name already exists"
A project with the name you input in the PROJECT
NAME screen already exists in the drive. Please
specify a different name.
The internal hard disk is the only available
save-destination for this data.
PROJECT
313