System Information Screen - Roland MV-8000 Owner's Manual

SYSTEM

SYSTEM INFORMATION screen

Here you can check the state of the MV-8000's system.
Explanation of each area
1. Version
Indicates the MV-8000's software version.
1. DIMM (Memory module) Size
Indicates the amount of memory installed in the
MV-8000.
• When shipped from the factory, a 128 MB DIMM is
installed.
• The DIMM holds wave data and event data.
2. Option
Shows the option boards that are installed in the
MV-8000.
Display
Audio I/O Expansion
VGA monitor/mouse connection kit
Value Explanation
Not Installed This option is not installed.
Installed This option is installed.
3. Wave Memory
Indicates the amount of wave data stored in the
DIMM, both numerically and as a graph.
used
326
Explanation
MV8-OP1
MV8-VGA
Free capacity
unused
To access this screen
➜ (move the cursor to the upper row of
•
icons) ➜
4. Sequence Memory
Indicates the amount of sequence data currently in
memory, both numerically and as a graph.
used
F-buttons
DIMM Diag (Memory Diagnosis)
Diagnoses the installed memory module. The DIMM
DIAGNOSIS popup (p. 327) will appear.
Initialize
Restores all the MV-8000's system parameters to their
factory-set state. A confirmation message "Initialize
all system parameters, OK?" will appear.
F-button Explanation
To cancel without initializing.
No
To initialize the parameters. When
you execute Initialize, all system
Yes
parameters will be initialized to
their factory-set state.
To cancel without initializing.
Free capacity
unused