Restoring A Project From A Cd-R/Rw Disc - Roland MV-8000 Owner's Manual

3. Move the cursor to the project that you want to backup, and press
(Execute).
Starts backup to CD-R/RW disc.

Restoring a project from a CD-R/RW disc

Here's how a project that was backed-up to a CD-R/RW can be restored to the hard
disk.
1.
Press .
The PROJECT MENU screen (p. 308) will appear.
2. With the cursor located in the lower row of icons, press
Alternatively, select the RECOVER FROM CD icon and press
The RECOVER PROJECT FROM CD popup (p. 318) will appear. Displays a project
name on CD-R/RW disc
3.
Specifies the "New Project on Hard disk" parameter for the recovered project
you want to recover.
By default, the project will be recovered with the name that is stored on the CD-R/RW
disc. If you want to recover the project as a different name, change the name.
4. Press (Execute).
Recovery will begin. When the project has been recovered, it will be saved on the hard
disk, and the backup CD will be ejected.
Project and disk management
(Recover).
.
Input a name for the new
project you want to create.
For details on inputting
text, refer to Quick Start
Inputting text (p. 9).
In order to use the recovered
project, load the project as
described in Loading a
project (p. 136).
141