Quick Assign (Audio Phrase) Screen - Roland MV-8000 Owner's Manual

SAMPLING

QUICK ASSIGN (AUDIO PHRASE) screen

Here you can assign samples to pads.
Explanation of each area
1. Sample Name
Displays the name of the sample.
2. Sample Channel
Displays the number of channel of the sample
(Mono/Stereo).
3. Wave window
Displays the sampled data (waveform).
4. Pads
Indicates the state of the pads in the current pad
bank.
Indicate Status
A partial is assigned to the pad.
Nothing is assigned.
An audio phrase will assign to the
enclosed pad.
5. Assign To
Selects the pad to which the sample will be assigned.
Range: 1-1~32-16
You can also specify a pad by striking it directly.
360
To access this screen
➜
•
(stop sampling) ➜
F-buttons
Name
Displays the EDIT NAME popup (p. 199), where you
can edit the pad name.
Preview
Auditions the currently-highlighted sample. To hear
auditioning, hold down [F4 (Preview)].
Set
Assigns the sample to the specified pad.
When automatically assigning samples, a
confirmation message will appear if a pad to which
a sample is already assigned would be overwritten.
EXIT
Returns to the SAMPLING / RE-SAMPLING screen
(p. 355) without assigning the sample data to a pad.
➜ (start sampling) ➜