Roland MV-8000 Owner's Manual page 272

INSTRUMENTS
Patch parameters controlled when control data
is received
Value Explanation
Specifies the amount of pitch change
in semitone steps.
Range:
Pitch
MIDI message: Aftertouch,
Control the filter cutoff frequency.
Range:
Cutoff
MIDI message: Bend, Aftertouch,
Control the amplifier level.
Range:
Level
MIDI message: Bend, Aftertouch,
Control the LFO rate.
Range:
MIDI message: Aftertouch,
LFO Rate
Control the pitch change (vibrato)
produced by the LFO.
Range:
Initial value:
LFO Depth
Pitch
MIDI message: Aftertouch,
Control the change in filter cutoff
frequency ("growl") produced by
the LFO.
LFO Depth
Range:
Filter
MIDI message: Aftertouch,
Control the change in amplifier level
(tremolo) produced by the LFO.
Range:
LFO Depth
MIDI message: Aftertouch,
Amplifier
272
-48~0~+48
Control Change
-63~0~+63
Control Change
-63~0~+63
Control Change
-63~0~+63
Modulation,
Control Change
-63~+63
Aftertouch=[+10]
Modulation=[+10]
ControlChange=[0]
Modulation,
Control Change
-63~0~+63
Modulation,
Control Change
-63~0~+63
Modulation,
Control Change
F-buttons
Solo/Porta (Solo/Portamento)
Displays the PATCH EDIT (SOLO/PORTAMENTO)
screen (p. 274).
Split
Displays the PATCH EDIT (SPLIT) screen (p. 273).
Library
Displays the PATCH LIBRARY screen (p. 268).
Partial Edit
Displays the PARTIAL EDIT screen (p. 276).