Move Popup - Roland MV-8000 Owner's Manual

MOVE popup

This moves the data of the "In time -- Out time"
region to the specified location.
Explanation of each area
1. To
Specifies the move-destination time.
Range: 0001-01-000~9999-**-***
** will depend on the time signature you set.
2. To Track
Specifies the move-destination track number.
Range: 1~136
• To Track appears only if you are using SEQUENCE
EDIT.
• If you've selected two or more tracks, you won't be
able to select the To Track value. (The display will
indicate "Multi tracks selected.")
3. Mode
Selects the way in which any data existing at the
move-destination will be handled.
Value Explanation
The data will be combined with the data
Merge
that exists at the move-destination.
The data will replace (overwrite) the data
Replace
that exists at the move-destination.
To access this screen
➜
• select a MIDI track as the current track
(
➜ ➜
or
The parameters in the MOVE popup will differ
according to whether you access it from PIANO
ROLL EDIT or from SEQUENCE EDIT. In this page
we describe all the parameters that might appear;
ignore the ones that don't apply.
4. Transpose
Specifies the move-destination note number.
Range: -127~127
• Transpose appears only if you are using PIANO
ROLL EDIT.
• If executing this transpose operation would cause
the note number to be higher than G9 or lower than
C-1.
F-buttons
Execute
Executes the Move operation.
You can use the VIEW FILTER popup (p. 245) to
select the events in SEQUENCE EDIT screen that
will be moved.
SEQUENCE
)
➜ ➜
choose Move
( )
227