Editing The Effect Parameters - Roland MV-8000 Owner's Manual

Using effects

Editing the effect parameters

You can edit the current effect settings to create your own effect settings.
1.
Perform steps 1~2 of Switching the effects on/off (p. 120).
2.
Press
(Edit).
Current
effect
MFX
Dly/Cho
Reverb
3.
Use to move the cursor to the parameter you want to edit, and use
the VALUE dial or
The effect setting will change.
Editing separate blocks of an MFX
If you've selected MFX as the current effect, the algorithm is a combination of
several types of effects. You can edit each of these effects (effect blocks) separately.
1. Access the MFX EDIT screen as described in Editing the effect
parameters (p. 122).
2. Use
to edit.
The tabs at the left edge of the screen show the effect block highlighted.
3. Use
dial or use
The effect setting will change.
122
Screen that appears
MFX EDIT screen (p. 375)
DELAY/CHORUS EDIT screen (p. 375)
REVERB EDIT screen (p. 375)
/ to edit the value.
(Block▲)/ (Block▼) to select the effect block you want
to move the cursor to a parameter, and turn the VALUE
/ to edit the value.