Transmitting Mmc To Control An External Sequencer - Roland MV-8000 Owner's Manual

6. Set the Device ID.
Set this value to match the Device ID setting of the MMC messages that are being sent
to the MV-8000.

Transmitting MMC to control an external sequencer

The MV-8000 can transmit MMC (MIDI Machine Control) messages to remotely
control an external MIDI device.
1. Press .
The SONG SETUP MENU screen (p. 256) will appear.
2. With the cursor located in the upper row of icons, press
Alternatively, select the SYNC icon and press
The SYNC screen (p. 259) will appear.
3. Set the MMC Mode parameter to Master.
The MV-8000 will be the MMC controller.
4.
Turn the MMC Output parameter On for the connector from which you want
MMC to be transmitted.
The MMC messages will be transmitted from the MIDI connector or R-BUS connector
that you turn On.
Using the MV-8000 with MIDI or V-LINK devices
(Sync).
.
If the incoming messages have
a device ID of "7F"
(Broadcast), the messages will
be received regardless of the
Device ID setting.
163