Song Parameter Screen - Roland MV-8000 Owner's Manual

SONG PARAMETER screen

Here you can make settings for the current song.
Explanation of each area
1. Song No. (Song number)
This is the song number. The MV-8000 can have up to
16 songs in each project, and these songs are
numbered 1~16.
2. Song Name
This is the name of the song.
3. Comment
This is a comment you can add to the song. You can
add a comment of up to fourty characters to each
song.
To input the Song Name, press [F1 (Name)] to
access the EDIT COMMENT popup (p. 258). To
input the Comment, press [F2 (Comment)] to access
the EDIT COMMENT popup (p. 258).
4. BPM (Song tempo)
Specifies the tempo of the song.
Range: 5.00~[100.00]~300.00
5. Time Signature
Specifies the time signature of the song, in terms of
the number of notes in a measure and their note
value.
Value Explanation
Number 1~4~32
2 (half notes), 4 (quarter notes), 8
Type
(eighth notes), 16 (sixteenth notes)
To access this screen
➜ (move the cursor to the upper line of icons)
•
➜
6. Tempo Track
Specifies whether the Tempo track (a track that
contains tempo and time signature data) will be used.
Value Explanation
The Tempo & Time Signature track will
not be used. The song will play accord-
Off
ing to the Song parameter settings BPM
and Time Signature.
The Tempo & Time Signature track will
be used. The BPM and time signature of
On
the song will change according to the
data in this track.
7. Sequence Memory
Indicates the amount of
memory available for recording
sequence data.
F-buttons
Name
Displays the EDIT NAME popup (p. 199).
Comment
Displays the EDIT COMMENT popup (p. 258).
SONG SETUP
used free
257