KNOB ASSIGN popup
Here you can assign effect parameters to the control
knobs (C1~C3). This lets you use the knobs to edit
parameters directly.
Explanation of each area
1. Effect block
Indicates the name of the effect block you are editing.
2. Parameter
Displays the names of the effect parameters assigned
to C1, C2, and C3.
To access this screen
➜ (select an current effect) ➜
•
the cursor to select the effect parameter you want to
assign to a knob) ➜
➜
➜
•
Assign)➜
F-buttons
C1 /
C2 /
These assign the effect parameter at the cursor to the
corresponding knob.
Cancel
Closes the KNOB ASSIGN popup.
EFFECTS
➜ (use
➜
➜ (select Knob
C3
377